The pistons in your car tend to accumulate carbon sludge over time. This is due to the gasoline burn up which sticks to the valves and other parts of the engine. The carbon residue built on the piston and the valves can cause problems with the car’s functioning. It can affect the power of the system and also increase the sound coming from it among other issues. Want to know the best way to clean carbon off pistons? Read on to know more.
In this article, we present you a guide on “how to clean pistons without removing” that is sure to answer your various questions on carbon cleaning such as how to remove carbon buildup on pistons and how to clean pistons without removing the head, and much more.
How to Clean Pistons without Removing
Step 1: Turn off the engine and make sure that the car is parked in a properly ventilated area.
Step 2: Once it is cooled, you can disconnect the air intake duct in your vehicle from the throttle body. To do this you can use the combustion chamber cleaner and by spraying through the throttle body.
It can be considered as one of the best formulas for dissolving carbon residues which can make the process of removing carbon much simpler.
Step 3: The next in line to be cleaned is the fuel rail or more like any apparatus that comes in the fuel stream of your vehicle.
Disconnect the fuel rail that connects the fuel tank to the injection rail.
Step 4: You should now clean the fuel rail by using the injection pressure apparatus and filling it with a cleaning substance.
Step 5: Turn on the ignition of your car and let it be in a steady state for a while. Your car will turn off once the cleaning substance is all used up.
Step 6: While you are at it, you should also try using gasoline enhancers as they play an important role in the efficiency of your system. Most enhancers need to be added to the tank when it almost full.
Add the enhancer to the fuel in your engine and it will be easy to dilute with the fuel already in. It will travel through the fuel stream and clear away any residue or blockage on its way
Step 7: You can also use an engine performance product so that it can boost the overall capacity of your vehicle. It would run through your vehicle and wash away all the carbon residue and sludge that has been accumulated over time.
Add the product to the existing engine oil and let it run the car for about 30 minutes. Now, stop your vehicle and empty the engine oil. You can now fill the engine with new oil.
Step 8: You are now all set to use your car with the better performing engine with no sludge and carbon residue.
Final Thoughts
I hope this article has helped you with all that is to know about how to clean pistons without removing them. There are a number of ways that can help dissolve or remove the sludge including but not limited to using fuel enhancers, performance booster engine oil, cleaning the combustion chamber, and the fuel rail. You can use any of these or a combination of methods to clean carbon off pistons. Also, note that the methods listed above may improve the performance of the vehicle but no so much. It is said that clean pistons and valves don’t necessarily mean a smoother drive and a better performing vehicle. However, it solely depends on the quality and condition of the engine and the amount of carbon build up in it.